The VIP-EXT100-2 1080P HDMI & USB/KM over IP Extension System provides Full HD video, audio, RS-232, and IR signal extension, point to point, with or without a network. The Transmitter can be connected to a Receiver supporting distances up to 120 meters, or through a network switch, effectively doubling the extension distance up to 240 meters.  Video over IP extension, when utilized on a network, allows you to convert your extension system at any time to distribution, switching, or matrix routing, a major advantage of Video over IP opposed to other technologies.

Key Features
    • Transmitter and Receiver enclosures – powered locally or by PoE 802.3af
    • Full HD – 1080P60 extension
    • Extend up to 120 meters TX direct to RX, or 240 meters TX to network switch to RX
    • Extend video, and stereo audio
    • Extend RS232, and Infrared
    • Convert extension system to a distribution, switching, or matrix system with additional Tx/Rx units
    • H.264 codec: =< 15mbps data rate, 390mS latency
Hardware
Audio HDMI w/embedded audio
Cabling Cat 5 UTP or better
Input Signal Type(s)
  • TX : HDMI v1.3, RS232
  • RX : RJ-45 H.264 UDP Multicast, RS232, IR
  • Output Signal Type(s) Configurable via PureMedia™ universal output cards supporting HDMI, HDBaseT, Fiber, and 3G-SDI
    Video output format
  • TX : HDMI v1.3 [loop out], RJ-45 H.264 UDP Multicast, IR
  • RX : HDMI v1.3
  • Performance
    Supported Distance Up to 120 m / 390 ft.
    Supported Resolutions Up to 1080p / 1920x1080
    Compliance HDCP 1.3
    Supported Audio Formats Up to 7.1 LPCM 192Khz / Dolby True HD / DTS-HD Master Audio
    Power Consumption 5 VDC, 600mA typical
    PoE (Power Over Ethernet) 802.3af
    Enclosure
    Product Dimensions
  • TX : 1.1” x 4.7” x 3.1 (29 mm x 120 mm x 79 mm)
  • RX : 1.1” x 4.7” x 3.1 (29 mm x 120 mm x 79 mm)
  • Product weight
  • TX : 0.61 lbs
  • RX : 0.61 lbs
  • Warranty
    Warranty Limited Warranty (3-Years)