The VIP-EXT-100-2 1080P HDMI & USB/KM over IP Extension System provides Full HD video, audio, RS-232, and IR signal extension, point to point, with or without a network. The Transmitter can be connected to a Receiver supporting distances up to 120 meters, or through a network switch, effectively doubling the extension distance up to 240 meters. Video over IP extension, when utilized on a network, allows you to convert your extension system at any time to distribution, switching, or matrix routing, a major advantage of Video over IP opposed to other technologies.
Key Features
- Transmitter and Receiver enclosures – powered locally or by PoE 802.3af
- Full HD – 1080P60 extension
- Extend up to 120 meters TX direct to RX, or 240 meters TX to network switch to RX
- Extend video, and stereo audio
- Extend RS232, and Infrared
- Convert extension system to a distribution, switching, or matrix system with additional Tx/Rx units
- H.264 codec: =< 15mbps data rate, 390mS latency
Specifications
| Hardware |
|
| Audio |
HDMI with embedded audio |
| Cabling |
CAT5 UTP or better |
| Input Signal Type(s) |
TX: HDMI 1.3, RS-232; RX: RJ45 H.264 UDP multicast, RS-232, IR |
| Output Signal Type(s) |
Configurable via PureMedia™ universal output cards for HDMI, HDBaseT, fiber, and 3G-SDI |
| Video Output Format |
TX: HDMI 1.3 loop output, RJ45 H.264 UDP multicast, IR; RX: HDMI 1.3 |
Performance |
|
| Supported Distance |
Up to 390 ft / 120 m |
| Supported Resolutions |
Up to 1080p / 1920 × 1080 |
| Compliance |
HDCP 1.3 |
| Supported Audio Formats |
Up to 7.1-channel LPCM at 192kHz, Dolby TrueHD, DTS-HD Master Audio |
| Power Consumption |
5V DC, 600mA typical |
| PoE (Power over Ethernet) |
IEEE 802.3af |
Enclosure |
|
| Product Dimensions |
TX: 1.1 × 4.7 × 3.1 in / 29 × 120 × 79 mm; RX: 1.1 × 4.7 × 3.1 in / 29 × 120 × 79 mm |
| Product Weight |
TX: 0.61 lbs; RX: 0.61 lbs |
Warranty |
|
| Warranty |
Limited Warranty, 3 Years |